User guide

6-96
Cisco Media Gateway Manager 5.0 User Guide
OL-5461-02
Chapter6 Configuring Hardware
How Do I Configure VXSM Cards?
6.7.6.3 Configuring XGCP Protocol
Once you have completed the steps in 6.7.6.1 Setting Up MGCs and MGC Groups, page 6-79, perform
the following steps to configure XGCP (TGCP) protocol:
Step 1 From the Domain Explorer window, select the node from the Hierarchy pane and choose
Configuration > MGX 8880/8850 MG > Configuration Center. The Configuration window for the
selected node opens.
Step 2 Under the Elements tab, within the node, double-click the VXSM card.
Step 3 Click on the XGCP tab. The Media Gateway XGCP Configuration option appears by default in the
Category drop-down arrow.
Figure 6-47 Configuration Center—VXSM XGCP Tab, Media Gateway XGCP Configuration
Category
Step 4
Configure the fields.
Note Table 6-50 describes fields in the VXSM XGCP tab, Media Gateway XGCP Configuration
category.
Step 5 Click Apply to configure XGCP (TGCP) protocol.