User guide

6-95
Cisco Media Gateway Manager 5.0 User Guide
OL-5461-02
Chapter 6 Configuring Hardware
How Do I Configure VXSM Cards?
Detect Long CP Tone
Duration
(milliseconds)
Duration for detecting a long call progressing tone.
Detect Long Digit
Duration
(milliseconds)
Duration for detecting a long digit tone signal.
Echo Cancellation Specifies whether or not the echo cancellation is enabled.
Echo Canceller Tail Echo canceller coverage.
Input Gain Amount of gain inserted at the receiver side of the interface.
Output Attenuation Amount of attenuation inserted at the transmit side of the interface.
VoIP VAD VAD (Voice Activity Detection) is enabled for the compression DSPs of this
interface when the application is VoIP.
VoIP VAD Timer
(milliseconds)
Hangover time for VAD in the VoIP application.
AAL2 VAD Timer
(milliseconds)
Hangover time for VAD in the VoATM over AAL2 application.
ATM Bearer Type ATM bearer type.
AAL Partial Fill Fill level of cells in case of AAL adaptation.
AAL Type Adaption layer of ATM.
Suppress Bearer Digit Controls if the digits should be suppressed from the voice media stream.
Transmitted COT,
Originating
Specifies the COT tone to be transmitted from the originating gateway in the
continuity test.
Received COT,
Originating
Specifies the COT tone to be received from the originating gateway in the
continuity test.
Table 6-49 Field Descriptions for the VXSM Create H.248 Termination Types Window
Field Name Description
Termination Type ID Unique identification number that is assigned to the termination type by the
manager.
H.248 Packages
Applied
H.248 packages applied to this termination type.
Termination Type Type of a group of ephemeral terminations.
Profile ID Property profile identifier with which the terminations within this termination
type will be associated.
Table 6-48 Field Descriptions for the VXSM Create H.248 Profile Properties Window (continued)
Field Name Description