User guide

6-93
Cisco Media Gateway Manager 5.0 User Guide
OL-5461-02
Chapter 6 Configuring Hardware
How Do I Configure VXSM Cards?
Transport Protocol Choose one of the following options that is used for the signaling traffic
associated with the H.248 protocol from the Transport Protocol drop-down
arrow:
• tcp (default)—Transport Control Protocol (TCP)
• udp—User Datagram Protocol (UDP)
Active MGC Address Address of the currently active MGC in this media gateway link.
Active MGC Port
Number
Transport layer port number of the currently active MGC in this media
gateway link.
Gateway Link Admin
State
Desired state of the gateway.
Gateway Link
Operational State
Current operational state of the gateway.
Table 6-47 Field Descriptions for the VXSM Extended Association Tab
Field Name Description
Gateway Link ID Unique link ID which identifies the signaling link this gateway is uses to
communicate with the gateway controllers to form an H.248 association.
Gateway IP Address
Index
MG IP address index.
Gateway IP Address IP address that the MGC uses to communicate with the MG.
Gateway Port TCP/UDP port number that the MGC uses to communicate with the MG.
Encoding Scheme Used to encode the H.248 messages that are sent/received to/from the gateway
controller.
Control Protocol Control protocol type in use.
Maximum Contexts Maximum number of contexts allowed in this media gateway link.
Maximum
Terminations
Maximum number of terminations per context in this media gateway link.
Gateway Execution
Time
Interval within which the MGC expects a response to any transaction from the
MG (exclusive of network delay specified by the object
cmedxGatewayInitialRtt).
MGC Execution Time Interval within which the MG expects a response to any transaction from the
MGC (exclusive of network delay specified by the object
cmedxGatewayInitialRtt).
Pending Response
Time
Time within which to expect a pending response if a transaction cannot be
completed in the MG and in the MGCs of the media gateway link.
Retries Before
Disconnect
Number of times the MG retries to connect to the MGC before it sends out a
disconnect command
Max Waiting Delay When a MG is powered on, it should initiate a restart timer to a random value,
uniformly distributed between zero and the value specified in this object.
Table 6-46 Field Descriptions for the VXSM Create MG-MGC Association Window (continued)
Field Name Description