User guide

6-92
Cisco Media Gateway Manager 5.0 User Guide
OL-5461-02
Chapter6 Configuring Hardware
How Do I Configure VXSM Cards?
Figure 6-46 Configuration Center—VXSM Create H.248 Termination Types Window
c.
Configure the fields.
Note Table 6-49 describes fields in the VXSM Create H.248 Termination Types window.
d. Click Apply to create the H.248 termination type.
Note For a description of all buttons within this tab, see section 6.2.3 Navigating Within Tables,
page 6-9.
Table 6-46 Field Descriptions for the VXSM Create MG-MGC Association Window
Field Name Description
Gateway Link ID Unique link ID that identifies the signalling link this gateway uses to
communicate with the Gateway Controllers to form an H.248 association.
Enter the value of 1 to identify the MG to MGC link in the Gateway Link ID
field. Only one link is supported.
MGC Group Index Unique index value to identify the particular MGC group. The range is 1-12.
Gateway IP Address
Index
Index value for the IP address of the media gateway. The range is 1-16.
Association ID Unique identification of the H.248 association assigned by the H.248 stack.