User guide

6-91
Cisco Media Gateway Manager 5.0 User Guide
OL-5461-02
Chapter 6 Configuring Hardware
How Do I Configure VXSM Cards?
Figure 6-45 Configuration Center—VXSM Create H.248 Profile Properties Window
c.
Configure the fields.
Note Table 6-48 describes fields in the VXSM Create H.248 Profile Properties window.
d. Click Apply to create the H.248 profile.
Step 4 Configure terminations for the switch circuit network (SCN) side of VXSM:
a. Add a voice interface (VIF)—See 6.7.5 Configuring Voice Interfaces, page 6-74.
b. Associate the Gateway Link ID and H.248 Pkg ID by completing the Gateway Link ID and H.248
Pkg IDs fields—See 6.7.5.3 Viewing or Modifying VIF Configuration, page 6-76).
Step 5 Configure terminations for the packet data network (PDN) side of VXSM:
a. Within the H.248 tab, choose the Termination Types option from the Category drop-down arrow.
b. Click Create. The Create H.248 Termination Types window appears.