User guide

6-83
Cisco Media Gateway Manager 5.0 User Guide
OL-5461-02
Chapter 6 Configuring Hardware
How Do I Configure VXSM Cards?
Figure 6-40 Configuration Center—XGCP Tab, XGCP MGC Association Category
d.
Configure the fields.
Note Table 6-44 describes fields in the VXSM XGCP tab, XGCP MGC Association category.
e. Click Apply to configure the MGC group for XGCP.
Step 4 Add a MGC to a MGC group:
a. Under the Elements tab, within the node, double-click the VXSM card.
b. Click on the MG Controller tab.
c. From the Category drop-down arrow, choose the MGC Groups option.
d. Click Create. The Create MGC Groups window appears.