User guide

6-82
Cisco Media Gateway Manager 5.0 User Guide
OL-5461-02
Chapter6 Configuring Hardware
How Do I Configure VXSM Cards?
Figure 6-39 Configuration Center—VXSM Create MGC IP Addresses Window
j.
Configure the fields.
Note Table 6-43 describes fields in the VXSM Create MGC IP Addresses window.
k. Click Apply to create the MGC IP address.
Step 3 (XGCP only, skip to step 4 if you are using H.248) Configure the MGC group for XGCP:
a. Under the Elements tab, within the node, double-click the VXSM card.
b. Click on the XGCP tab.
c. From the Category drop-down arrow, choose the XGCP MGC Association option.