User guide

6-79
Cisco Media Gateway Manager 5.0 User Guide
OL-5461-02
Chapter 6 Configuring Hardware
How Do I Configure VXSM Cards?
6.7.6.1 Setting Up MGCs and MGC Groups
Figure 6-36 Process for Setting Up MGCs and MGC Groups
Step 1 Create an MGC by assigning it a domain name, and specify how the domain name is to be resolved:
a. From the Domain Explorer window, choose Configuration > MGX 8880/8850 MG >
Configuration Center.
b. Under the Elements tab, within the node, double-click the VXSM card.
c. Click on the MG Controller tab. The Domain Names category appears by default.
d. Click Create. The Create MGC Domain Names window appears.
130006
Change the IP address
resolution and (optionally)
create an IP address for the
domain
(XGCP only) Configure the
MGC
g
rou
p
for XGCP
Create a
domain name for
the MGC
Add a MGC
to a MGC group