User guide

6-75
Cisco Media Gateway Manager 5.0 User Guide
OL-5461-02
Chapter 6 Configuring Hardware
How Do I Configure VXSM Cards?
Figure 6-34 Configuration Center—VXSM Create DSX0 Group Window
Step 5
Configure the fields.
Note Table 6-38 describes the fields in the VXSM Create DSX0 Group window.
Step 6 Click Apply to add the VIF.
Note For a description of all buttons within this tab, see section 6.2.3 Navigating Within Tables, page
6-9.
Table 6-38 Field Descriptions for the VXSM Create DSX0 Group Window
Field Name Description
DSX0 Grp Index Value that identifies the DS0 group in the T1/E1 interface. T1 range is 0-23;
E1 range is 0-30.
DS0 Channels Bitmap of the selected DS0 channels to be added into this group. T1 range is
1-24; E1 range is 1-31.
DSX0 Service Type Specifies the service type of the CAS/DS0 group. Values include:
• xgcp—specifies the xgcp (tgcp) protocol.
• h248—specifies the ITU H2.48 protocol media gateway control service
type that is used when the DS0 is configured for null signaling.