User guide

6-66
Cisco Media Gateway Manager 5.0 User Guide
OL-5461-02
Chapter6 Configuring Hardware
How Do I Configure VXSM Cards?
6.7.3 Creating and Assigning an IP Address for the Connection
Step 1 From the Domain Explorer window, select the node from the Hierarchy pane and choose
Configuration > MGX 8880/8850 MG > Configuration Center. The Configuration window for the
selected node opens.
Step 2 Within the Elements tab, expand the node, then double-click the VXSM card that contains the
connection you created.
Step 3 Click the Media Gateway tab.
Step 4 Choose the PVC IP Address option from the Category drop-down arrow.
Step 5 Click Create to display the Create PVC IP Address window.
Step 6 Complete the fields. Make sure to use the same VPI/VCI combination entered when you created the
connection.
Note Table 6-33 describes fields in the VXSM Create PVC IP Address window.
Step 7 Click Apply to add the IP address for the connection.
Note For a description of all buttons within this tab, see section 6.2.3 Navigating Within Tables, page
6-9.
Table 6-32 Field Descriptions for the VXSM Media Gateway Tab, Gateway Capabilities Category
Field Name Description
Gateway Domain
Name
Domain name under which the media gateway could also be registered in a
DNS name server.
VT Mapping Mode Represents the VT mapping mode, which can be either:
• standard—standard mapping mode
• titan—Titan 5500 mapping mode. Only valid if SONET line medium type
is SONET and SONET path payload type is VT1.5.
Total Number of DSPs Total number of DSPs in the card.
Table 6-33 Field Descriptions for the VXSM Create PVC IP Address Window
Field Name Description
Index A unique index to identify each media gateway IP address.
Interface Virtual port associated to the media gateway IP address.
VPI Represents the VPI of the PVC associated to the IP address.
VCI Represents the VCI of the PVC associated to the IP address.
IP Address Configured IP address of the media gateway.