User guide

6-65
Cisco Media Gateway Manager 5.0 User Guide
OL-5461-02
Chapter 6 Configuring Hardware
How Do I Configure VXSM Cards?
6.7.2 Enabling the Mapping Mode for VXSM
Step 1 From the Domain Explorer window, choose Configuration > MGX 8880/8850 MG > Configuration
Center.
Step 2 Under the Elements tab, within the node, double-click the VXSM card.
Step 3 Click the Media Gateway tab. The Gateway Capabilities category appears by default.
Step 4 Set the VT Mapping Mode to standard or titan.
Note Table 6-33 describes fields in the VXSM Media Gateway tab, Gateway Capabilities category.
For additional information on this field, refer to the Cisco Voice Switch Services (VXSM)
Configuration Guide and Command Reference for MGX Switches and Media Gateways, Release
5.
Step 5 Click Apply to enable the mapping mode.
Note For a description of all buttons within this tab, see section 6.2.3 Navigating Within Tables, page
6-9.
Min VPI Beginning of the VPI range for this partition. For RPM VCC partitions, the
range is 0-0. For RPM VPC partitions, the range is 1-255. For VXSM, the
range is 0-255.
Max VPI End of the VPI range for this partition. For RPM VCC partitions, the range is
0-0. For RPM VPC partitions, the range is 1-255. For VXSM, the range is
0-255.
Min VCI Beginning of the VCI range for this partition. For VXSM, the range is
1-65535.
Max VCI End of the VCI range for this partition. For VXSM, the range is 1-65535.
Min Connections Guaranteed number of connections that can be configured on this partition.
For VXSM, the range is 1-8100.
Max Connections Maximum number of connections that can be configured on this partition. For
VXSM, the range is 1-8100.
Egress BW Used Percentage bandwidth used by the resource partition in egress direction.
Egress BW Avail Percentage bandwidth available on the resource partition in egress direction.
Ingress BW Used Percentage bandwidth used by the resource partition in ingress direction.
Ingress BW Avail Percentage bandwidth available on the resource partition in ingress direction.
Used Connections Number of connections currently in use on this partition.
Avail Connections Number of connections available that can be added on this partition.
Table 6-31 Field Descriptions for the VXSM Create Resource Partitions Window (continued)
Field Name Description