User guide

6-60
Cisco Media Gateway Manager 5.0 User Guide
OL-5461-02
Chapter6 Configuring Hardware
How Do I Configure AXSM Cards?
6.6.6.1 Modifying ILMI Configuration
Step 1 Within the AXSM Resource Partitions tab (see 6.6.6 Creating a Resource Partition for AXSM, page
6-57) choose the ILMI Configuration option from the Category drop-down arrow.
Figure 6-30 Configuration Center—AXSM Resource Partitions Tab, ILMI Configuration Category
Step 2 Choose the appropriate options from the ILMI Enabled and ILMI Trap Enable drop-down arrows, and
modify data as desired. Click Apply.
Note Table 6-30 describes fields in the AXSM Resource Partitions tab, ILMI Configuration category.
For a description of all buttons within this tab, see section 6.2.3 Navigating Within Tables, page
6-9.
Table 6-30 Field Descriptions for the AXSM Resource Partitions Tab, ILMI Configuration
Category
Field Name Description
ILMI Enabled Indicates if ILMI signalling is enabled or disabled.
Signalling Vpi Vpi on which signalling cells arrive.
Signalling Vci Vci on which signalling cells arrive.
ILMI Trap Enable Indicates if ILMI trap generation is enabled or disabled.