User guide

6-54
Cisco Media Gateway Manager 5.0 User Guide
OL-5461-02
Chapter6 Configuring Hardware
How Do I Configure AXSM Cards?
Step 3 Click the AXSM Sonet Line APS tab. Within the Sonet Line APS tab, you can:
a. Click Create to create a new Sonet Line APS
or
b. Select the line you want to modify, then click Details
Figure 6-27 Configuration Center—AXSM Sonet Line APS Tab
Step 4
Configure the fields.
Step 5 Click Apply to save any changes.
Note Table 6-27 describes fields in the AXSM Sonet Line APS tab.
For a description of all buttons within this tab, see section 6.2.3 Navigating Within Tables, page
6-9.
Table 6-27 Field Descriptions for the AXSM Sonet Line APS Tab
Field Name Description
Working Bay Working bay number.
Working Line Working line number.
Protection Slot Protection slot number.
Protection Bay Protection bay number.
Protection Line Protection line number.