User guide

6-52
Cisco Media Gateway Manager 5.0 User Guide
OL-5461-02
Chapter6 Configuring Hardware
How Do I Configure AXSM Cards?
6.6.3.4 Setting Up the Plcp Statistical Alarm Severity
Step 1 Within the AXSM DS3 Line Config tab (for details, see 6.6.3 Enabling DS3 Lines for AXSM, page
6-47) choose the Plcp Alarm option from the Category drop-down arrow.
Step 2 Choose the Plcp Statistical Alarm Severity level from the drop-down arrow. Values include:
• none
• minor
• major
Step 3 Configure additional fields as desired.
Note Table 6-26 describes fields in the AXSM DS3 Line Config tab, Plcp Alarm category.
Step 4 Click Apply to set up the Plcp statistical alarm severity.
Note For a description of all buttons within this tab, see section 6.2.3 Navigating Within Tables, page
6-9.
Table 6-25 Field Descriptions for the AXSM DS3 Line Config Tab, ATM Cell Layer Category
Field Name Description
Cell Layer Description This string should include the name of the manufacturer, the product name and
the version of the hardware interface.
Status Current operational state of the interface. The testing state indicates that no
operational packets can be passed.
Null Cell Header First four bytes of the ATM header to be used for null cells.
Null Cell Payload Null cell payload definition. Default value is 0x6A.
HEC Coset Enable If set to true, the algorithm of Coset Polynomial Addition is applied to perform
header error check calculations. Applies to transmitted and received cells.
Payload Scrambling Indicates whether payload scrambling is enabled or not.