User guide

6-50
Cisco Media Gateway Manager 5.0 User Guide
OL-5461-02
Chapter6 Configuring Hardware
How Do I Configure AXSM Cards?
6.6.3.2 Setting Up the DSX3 24 Hour Alarm
Step 1 Within the AXSM DS3 Line Config tab (for details, see 6.6.3 Enabling DS3 Lines for AXSM, page
6-47) choose the Dsx3 24 Hr Alarm Config option from the Category drop-down arrow.
Step 2 Configure fields as desired.
Note Table 6-24 describes fields in the AXSM DS3 Line Config tab, Dsx3 24 Hr Alarm Config
category.
Step 3 Click Apply to set up the DSX3 24 hour alarm configuration.
Note For a description of all buttons within this tab, see section 6.2.3 Navigating Within Tables, page
6-9.
15 Min LCV
Threshold
If this value is exceeded in a 15 minute window, a statistical alarm will be
declared.
15 Min LES Threshold
15 Min PCV
Threshold (only for
T3)
15 Min PES Threshold
(only for T3)
15 Min PSES
Threshold (only for
T3)
15 Min SEFS
Threshold
15 Min UAS
Threshold
15 Min CCV
Threshold (only for
T3)
15 Min CES
Threshold (only for
T3)
15 Min CSES
Threshold (only for
T3)
Table 6-23 Field Descriptions for the AXSM DS3 Line Config Tab, 15 Min Alarm Config Category
(continued)
Field Name Description