User guide

6-49
Cisco Media Gateway Manager 5.0 User Guide
OL-5461-02
Chapter 6 Configuring Hardware
How Do I Configure AXSM Cards?
6.6.3.1 Setting Up Statistical Alarm Severity
Step 1 Within the AXSM DS3 Line Config tab (for details, see 6.6.3 Enabling DS3 Lines for AXSM, page
6-47) select the 15 Min Alarm Config option in the Category drop-down arrow.
Step 2 Choose the Statistical Alarm Severity level from the drop-down arrow. Values include:
• none
• minor
• major
Step 3 Configure additional fields as desired.
Note Table 6-23 describes fields in the AXSM DS3 Line Config tab, 15 Min Alarm Config category.
Step 4 Click Apply to set up the statistical alarm severity.
Note For a description of all buttons within this tab, see section 6.2.3 Navigating Within Tables, page
6-9.
Invalid Intervals Number of intervals in the range from 0 to dsx3ValidIntervals for which no
data is available.
Line Length (meters) Length of the DS3 line.
Descriptor Line descriptor.
Table 6-22 Field Descriptions for the AXSM DS3 Line Config Tab, Line Config Category
(continued)
Field Name Description
Table 6-23 Field Descriptions for the AXSM DS3 Line Config Tab, 15 Min Alarm Config Category
Field Name Description
Statistical Alarm
Severity
Sets up the severity of any of the statistical alarms.
DS3 Line Statistics
Alarm
Bitmap of the DS3 line statistical alarms.