User guide

6-47
Cisco Media Gateway Manager 5.0 User Guide
OL-5461-02
Chapter 6 Configuring Hardware
How Do I Configure AXSM Cards?
6.6.3 Enabling DS3 Lines for AXSM
Step 1 From the Domain Explorer window, select the node from the Hierarchy pane and choose
Configuration > MGX 8880/8850 MG > Configuration Center. The Configuration window for the
selected node opens.
Step 2 Within the Elements tab, expand the node, then double-click an AXSM (T3E3) card.
Step 3 Click the Lines tab. Click on the line you want to enable, then click Details. The Line Config tab
appears, with the Line Config category selected by default.
Note For details on the Ports tab, see section 6.6.5 Creating a Port for AXSM, page 6-55.
Figure 6-26 Configuration Center—AXSM DS3 Line Config Tab, Line Config Category
Line Length (meters) Length of the DS1 line. Only useful if the interface has configurable line build
out circuitry.
Loopback Status Current state of loopback on the DS1 interface.
Descriptor Line descriptor.
Table 6-21 Field Descriptions for the AXSM DS1 Line Config Tab (continued)
Field Name Description