User guide

6-46
Cisco Media Gateway Manager 5.0 User Guide
OL-5461-02
Chapter6 Configuring Hardware
How Do I Configure AXSM Cards?
Figure 6-25 Configuration Center—AXSM DS1 Line Config Tab
Step 4
Choose the Up option from the Admin Status drop-down arrow.
Step 5 (Optional) Verify or modify additional fields, as desired.
Note Table 6-21 describes fields in the AXSM DS1 Line Config tab.
For a description of all buttons within this tab, see section 6.2.3 Navigating Within Tables, page
6-9.
Table 6-21 Field Descriptions for the AXSM DS1 Line Config Tab
Field Name Description
Admin Status Desired state of the interface.
Time Elapsed Number of seconds that have elapsed since the beginning of the near end
current error measurement period.
Valid Intervals Number of previous near end intervals for which data was collected.
Line Type Configured line type.
Line Coding Type of zero code suppression used on this interface.
Loopback Config Desired loopback configuration.
Line Status Line status of interface.
Transmit Clock
Source
Source of transmit clock.