User guide

6-42
Cisco Media Gateway Manager 5.0 User Guide
OL-5461-02
Chapter6 Configuring Hardware
How Do I Configure AXSM Cards?
6.6.1.4 Configuring the Sonet Path Alarm
Step 1 Within the Line Config tab (see 6.6.1 Enabling SONET Lines for AXSM, page 6-34) choose the Sonet
Path Alarm option from the Category drop-down arrow.
Figure 6-23 Configuration Center—AXSM Line Config Tab, Sonet Path Alarm Category
Note Table 6-19 describes fields in the AXSM Line Config tab, Sonet Path Alarm category.
Step 2 Choose the appropriate option from the Alarm Severity drop-down arrow. Input the other fields with
data as desired.
Step 3 Click Apply.
Note For a description of all buttons within this tab, see section 6.2.3 Navigating Within Tables, page
6-9.