User guide

6-40
Cisco Media Gateway Manager 5.0 User Guide
OL-5461-02
Chapter6 Configuring Hardware
How Do I Configure AXSM Cards?
6.6.1.3 Configuring the Sonet Section Alarm
Step 1 Within the Line Config tab (see 6.6.1 Enabling SONET Lines for AXSM, page 6-34) choose the Sonet
Section Alarm option from the Category drop-down arrow.
Figure 6-22 Configuration Center—AXSM Line Config Tab, Sonet Section Alarm Category
Note Table 6-18 describes fields in the AXSM Line Config tab, Sonet Section Alarm category.
Step 2 Choose the appropriate option from the Alarm Severity drop-down arrow. Input the other fields with
data as desired.
Step 3 Click Apply.
Note For a description of all buttons within this tab, see section 6.2.3 Navigating Within Tables, page
6-9.