User guide

6-34
Cisco Media Gateway Manager 5.0 User Guide
OL-5461-02
Chapter6 Configuring Hardware
How Do I Configure AXSM Cards?
Step 3 Create a port—See 6.6.5 Creating a Port for AXSM, page 6-55.
Step 4 Create a resource partition—See 6.6.6 Creating a Resource Partition for AXSM, page 6-57.
Step 5 Create a connection—For information on creating connections, see Chapter 7, “Provisioning
Connections.”
6.6.1 Enabling SONET Lines for AXSM
Step 1 From the Domain Explorer window, select the node from the Hierarchy pane and choose
Configuration > MGX 8880/8850 MG > Configuration Center. The Configuration window for the
selected node opens.
Step 2 Within the Elements tab, expand the node, then double-click an AXSM (OC) card.
Step 3 Click the Lines tab. Click on the line you want to enable, then click Details. The Line Config tab
appears, with the Sonet Line Config category selected by default.
Note For details on the Ports tab, see section 6.6.5 Creating a Port for AXSM, page 6-55.
Figure 6-19 Configuration Center—AXSM Sonet Line Config Tab, Sonet Line Config Category