User guide

6-29
Cisco Media Gateway Manager 5.0 User Guide
OL-5461-02
Chapter 6 Configuring Hardware
How Do I Configure Cisco MGX 8880 and 8850 Nodes?
Figure 6-16 Configuration Center—Clocking Tab, Manual Clock Sources Category
Note Table 6-13 describes fields in the Clocking tab.
Step 4 To create a new clock source, proceed as follows:
a. Click Create. Complete the following fields:
– Priority
– Clock Source Index
b. Click Apply.
Note For a description of all buttons within this tab, see section 6.2.3 Navigating Within Tables, page
6-9.