User guide

6-24
Cisco Media Gateway Manager 5.0 User Guide
OL-5461-02
Chapter6 Configuring Hardware
How Do I Configure Cisco MGX 8880 and 8850 Nodes?
Figure 6-12 Configuration Center—Peripherals Tab, Sensors Category
Note Table 6-11 describes the fields in the Sensors table.
Step 4 (Optional) Click Refresh to refresh the table.
Note For a description of all buttons within this tab, see section 6.2.3 Navigating Within Tables, page
6-9.
Table 6-11 Field Descriptions for the Sensors Table
Field Name Description
Description Specifies the type of environmental state, such as temperature, DC voltage,
bottom fan tray, and so forth.
Value Reports the most recent measurement seen by the sensor.
Type Indicates the type of data reported by the Value parameter. The variable is set
by the agent at start-up and the value does not change during operation.
Value Last Updated Indicates the status of the value.
Value TimeStamp Indicates the date and time of the value reported in the Value parameter.
Update Rate Indicates the rate that the agent updates the Value parameter.