User guide

6-22
Cisco Media Gateway Manager 5.0 User Guide
OL-5461-02
Chapter6 Configuring Hardware
How Do I Configure Cisco MGX 8880 and 8850 Nodes?
Figure 6-11 Configuration Center—Peripherals Tab, Serial Interface Tab
a.
Enter the Speed, and configure the Stop Bits and Parity, if applicable.
b. Click Apply.
Note Table 6-10 describes the fields in the Serial Interfaces tab.
For a description of all buttons within this tab, see section 6.2.3 Navigating Within Tables, page
6-9.