User guide

6-19
Cisco Media Gateway Manager 5.0 User Guide
OL-5461-02
Chapter 6 Configuring Hardware
How Do I Configure Cisco MGX 8880 and 8850 Nodes?
6.4.4 Managing Node Peripherals
These tasks are used to manage peripherals:
• 6.4.4.1 Displaying IP Interfaces, page 6-19
• 6.4.4.2 Configuring Serial Interfaces, page 6-20
• 6.4.4.3 Displaying Sensors, page 6-23
6.4.4.1 Displaying IP Interfaces
Step 1 From the Domain Explorer window, select the node from the Hierarchy pane and choose
Configuration > MGX 8880/8850 MG > Configuration Center. The Configuration window for the
selected node opens.
Step 2 Click the Peripherals tab. The IP Interfaces option appears by default in the Category drop-down
arrow.
Entity Sensors,
Sensor Threshold
Tab
Threshold Index Index that uniquely identifies an entry in the
entSensorThreshold table. This index permits the same
sensor to have several different thresholds.
Threshold Severity Severity of this threshold.
Threshold Relation Relation between sens or value and threshold value,
required to trigger the alarm.
Threshold Value Value of the threshold.
Threshold
Evaluation
Result of the most recent evaluation of the threshold.
Threshold
Notification
Controls generation of entSensorThresholdNotification for
this threshold.
Card Information
(VISM-PR only)
Slot Number Slot number of the card.
Card Type This object holds the type of the card, for processor module
as well as service module.
Card Change Type Type of card change.
Daughter Card
Information
(VISM-PR only)
Daughter Card
Serial Number
The serial number is on the non-volatile RAM on the P
daughter card, entered by the manufacturer.
Daughter Card
Description
Describes the VISM-PR daughter card.
Daughter Card
Hardware (HW)
Revision
Hardware revision number for the daughter card.
Table 6-9 Field Descriptions for the Cards Tab (continued)
Category Field Name Description