User guide

6-14
Cisco Media Gateway Manager 5.0 User Guide
OL-5461-02
Chapter6 Configuring Hardware
How Do I Configure Cisco MGX 8880 and 8850 Nodes?
Step 2 Check or configure each field, as applicable.
Note Some fields are grayed out, meaning they are not configurable.
Step 3 Click Apply to apply the current node configuration settings.
Note For a description of all buttons within this tab, see section 6.2.3 Navigating Within Tables, page
6-9.
Table 6-8 Field Descriptions for the Node Tab
Field Name Description
Description Description of the managed node.
Up Time System up time of the current node.
Contact Contact person for the managed node.
Location Physical location of the node.
Node Name Administratively assigned name for the node.
Integrated Alarm Status
(read-only)
Integrated alarm status of the shelf. The following options are valid:
• Clear
• Minor
• Major
• Critical
Filtered Alarm Status
(read-only)
Filtered alarm status of the shelf. The following options are valid:
• Clear
• Minor
• Major
• Critical
Date and Time Current local date and time for the system.
Clock Lost on Reboot (if
applicable)
Indicates whether the system can preserve knowledge of current
date and time across a system reboot.
System Country Country where the system is physically located.
Descriptor Node descriptor.