User guide

5-37
Cisco Media Gateway Manager 5.0 User Guide
OL-5461-02
Chapter 5 Maintaining an Efficient Network
How Do I Modify the Network?
• Available NEs
• (Optional) Job Comments
• Tag Name
• Time (time zone)
Note The time zone can be Greenwich mean time (GMT), a user-defined offset from GMT, or local
time, depending on what is specified in the User Preferences dialog box.
Click Finish to initiate the memory backup procedure.
The configuration file is copied to the
/opt/CiscoMGMServer/admin/nodename/MGX-timestamp-bkp.cfg file.
Note If User Specified is chosen and hello is entered for the tag name, the filename is
MGX-hello-YYYYMMDDHHMM-backup.cfg where YYYYMMDDHHMM is the backup
date, consisting of:
YYYY—Four-digit year
MM—Two-digit month
DD—Two-digit day
HH—Two-digit hour (in 24-hour format)
MM—Two-digit minute
The length of a filename including a user specified name should not exceed 40 characters.
If a long filename is chosen, it will be truncated to 15 characters.
After scheduling the backup, look at the Job Monitor Table (Administration > Job Monitor) to see the
job status. If the job fails, the Additional Information field in the Job Monitor Table provides extra
information.
If a memory backup job fails, it raises an EMS alarm. All prior memory backup failure EMS alarms on
an NE are cleared under the following conditions:
• After a successful memory backup operation on the NE
• When the operational state of the NE changes to Out of Service
Table 5-15 Memory Backup Dialog Box Descriptions
Field Description
NE Model Select the NE type that you want to back up. The type you select determines the NEs
that are displayed in the Network Elements area.
Available NEs Use the Add and Remove buttons to move the NEs that you want to back up to the
Selected NEs list, or to remove NEs from the list.
Job Comments
(Optional)
Enter comments about the backup, if needed.