User guide

5-31
Cisco Media Gateway Manager 5.0 User Guide
OL-5461-02
Chapter 5 Maintaining an Efficient Network
How Do I Monitor the Network?
For parameter definitions, see Table 5-13.
Step 6 In the Node Login Information area:
a. Enter the user name in the User Id field.
b. Enter password in the Password field.
Step 7 Click Check Manageability to run a diagnostic check for the node.
Step 8 Verify the check results from the Manageability Check Results area.
For parameter definitions, see Table 5-14.
5.2.10.3 Statistics Entries for Network Manageability
The statistics entries that are used for network manageability are described in Table 5-13 and Table 5-14.
Table 5-13 lists the parameters for the protocol statistics that are health-related.
Table 5-13 Health Related Parameters
Name Description
Node Id Identifies the ID for the configured node.
Node Name Identifies the configured name of the node.
Protocol Specifies the protocol for either FTP or SNMP.
Average Throughput Measures the average FTP throughput performance in bytes per second for the
switch during the specified time period. The average SNMP throughput is
measured in seconds per request for the switch during the specified time period.
Min Throughput Measures the minimum throughput performance for FTP, and SNMP on a per
node basis. The minimum throughput is calculated for FTP, and SNMP
operations.
Max Throughput Measures the maximum throughput performance for FTP, and SNMP on a per
node basis. The maximum throughput is calculated for FTP, and SNMP
operations. The value is the maximum rate achieved in bytes per second for any
one FTP request to complete.
Success Specifies the number of successful FTP, or SNMP operations for the node
during the specifies time period.
Session Failure Specifies the number of network failures for the session.
Transfer Failure Specifies the number of network failures for the transfer.
Retry Exceeded Provides information about the number of times for retries that exceeded the
maximum set limit.
File Size Mismatch Specifies that the file transfer is considered a success if the local file size
matches with the remote file size. For a mismatch, an error is reported.
Throttle Error Determines the maximum limit for the number of pending Get, Set, and
GetNext operations reached for the switch.
Session Timeout Specifies the session timeout period where the FTP request remains in the
request queue.