User guide

5-29
Cisco Media Gateway Manager 5.0 User Guide
OL-5461-02
Chapter 5 Maintaining an Efficient Network
How Do I Monitor the Network?
5.2.10.1 Running a Diagnostic Check at the Network Level
In the Diagnostic Center, you can verify that all the nodes in the network are being managed correctly
by Cisco MGM.
To run a diagnostic check at the network level:
Step 1 In the Diagnostic Center, double-click or drag and drop the network from the Hierarchy pane to the right
hand pane, to display the diagnostics at the network level.
Step 2 Click the Manageability tab. See Figure 5-3.
Step 3 In the From Period area:
a. Choose the date to start from the Date drop-down arrow.
b. Choose the time from the Time drop-down arrow.
The default time is 12:00 a.m (0000).
Step 4 In the To Period area:
a. Choose the date to end from the Date drop-down arrow.
The maximum number of days to keep data is 30 days. The minimum number of days is 1.
b. Choose the time from the Time drop-down arrow.
The default time is 12:00 a.m (0000).
Step 5 Click Refresh to refresh the health data for the network.
Step 6 Verify the statistics values for each node ID and node name from the Protocols Statistics area.
For parameter definitions, see Table 5-13.
Step 7 Verify the manageability data results for the node from the Manageability Check Results area.
For parameter definitions, see Table 5-14.
Step 8 Click Refresh to retrieve all check result entries in the manageability table for every node in the
network.