User guide

5-22
Cisco Media Gateway Manager 5.0 User Guide
OL-5461-02
Chapter 5 Maintaining an Efficient Network
How Do I Monitor the Network?
Figure 5-2 Chassis View - Front View
5.2.5 Monitoring a Line or Port with Chassis View
You can select a port if managed objects are associated with a particular port, line, or interface.
To monitor a line or port:
Step 1 In Chassis View, there are two ways to choose the line or port:
• Choose the line or port from the Hierarchy pane, or
• Click the line or port that you want to display from the node view. A yellow border highlights the
chosen line or port in the node view.
Step 2 Click the Front View tab or Rear View tab of the node. The default is the front view.
Check the status of the line or port from Inspector View.
Step 3 Right-click the line or port and choose the corresponding application. If you want configure the settings
for the line or port, choose Configuration Center.
The Configuration Center is launched with a view of the network elements.