manual

5-4
Cisco TelePresence System 500-32 Installation, First-Time Setup, and Field-Replaceable Unit Guide
OL-23420-01
Chapter 5 Field-Replaceable Units and Region- and Country-Specific Power Cables
Replacing the Codec—Part Number CTS-CODEC-SING-G1= or CTS-CODEC-SING1CH= (China Only)
Figure 5-1 Serial Number Location
Replacing the Codec—Part Number CTS-CODEC-SING-G1= or
CTS-CODEC-SING1CH= (China Only)
This section provides you with the procedure to replace the codec for your system and includes the
following topics:
• Tools required, page 5-4
• Replacing the Codec—Video, page 5-4
• Replacing the Codec—Detailed Steps, page 5-5
Tools required
One #2 Phillips screwdriver
Replacing the Codec—Video
For videos that show removal and replacement of the codec, refer to the following URLs:
http://www.cisco.com/en/US/docs/telepresence/cts_500/cts_500_32/assembly/guide/video/
fru_videos/removing_the_codec.html
http://www.cisco.com/en/US/docs/telepresence/cts_500/cts_500_32/assembly/guide/video/
fru_videos/installing_the_codec.html
343340
SN: XXXNNNNXXXX