manual

5-3

Cisco TelePresence System 500-32 Installation, First-Time Setup, and Field-Replaceable Unit Guide

OL-23420-01

Chapter 5 Field-Replaceable Units and Region- and Country-Specific Power Cables

Finding the Serial Number Location

You might need the serial number of your CTS 500-32 to order FRUs. The serial number is located on

the rear of the display as shown in Figure 5-1.

CTS500-32-PED= Pedestal (Stand-Mount only)

CTS500-32-PEDCOL= Column for table stand (Table-Mounted systems only)

CTS500-32-TABMT= Table mount

Note Order this FRU to convert your system from a pedestal-mounted to a

table-mounted system.

CTS-CABCVR-FLR= Cable cover floor mat (Optional)

CTS-CAB-HDMIDVID2= HDMI to DVI-D external presentation cable, 2 meters (Optional)

CTS-CABL-VGA-2= VGA-to-VGA external presentation cable, 2 meters

CTS-CAB-MGMTCUP= External presentation cable holder (table-mounted cable cup) (Optional)

CTS-CAM-TOOL-G2= Camera targets (small and large) (Optional)

CTS-CODEC-SING1CH= Codec (China only)

Note To replace this part, follow the procedure in the “Replacing the

Codec—Part Number CTS-CODEC-SING-G1= or

CTS-CODEC-SING1CH= (China Only)” section on page 5-4.

CTS-CODEC-SING-G1= Codec

Note To replace this part, follow the procedure in the “Replacing the

Codec—Part Number CTS-CODEC-SING-G1= or

CTS-CODEC-SING1CH= (China Only)” section on page 5-4.

CTS-CODEC-S-PWR= Power supply

Table 5-1 FRUs for the CTS-500-32 (continued)

FRU Description