manual

5-14
Cisco TelePresence System 500-32 Installation, First-Time Setup, and Field-Replaceable Unit Guide
OL-23420-01
Chapter 5 Field-Replaceable Units and Region- and Country-Specific Power Cables
Replacing the Camera Lens Cover—Part Number CTS500-32-LENSCVR=
Replacing the Camera Lens Cover—Part Number
CTS500-32-LENSCVR=
To replace the camera lens cover, complete the following steps:
Step 1 Log in to the Cisco TelePresence System (CTS) by completing the following steps:
Open a browser and type in the IP address of the system in the URL and press Enter.
a. In the Admin field, type admin.
b. In the Password field, type cisco.
c. Click Login.
d. Navigate to Troubleshooting > Hardware Setup > Cameras.
Step 2 Click Start.
The camera drops from its enclosure.
Step 3 Unscrew the screw that attaches the camera lens cover to the display assembly.