Datasheet

A-62
Catalyst 6500 Series Switches Installation Guide
OL-5781-07
Appendix A Power Supply Specifications
8700 W AC-Input Power Supply
8700 W Power Supply AC Power Cords
Table A-41 lists the specifications for the AC power cords that are available for the 8700 W AC-input
power supply. Included in the table are references to illustrations of the power cords.
TableA-41 8700W Power Supply AC Power Cords
Locale Power Cord
Part Number
AC Source Plug Type Cordset Rating Power Cord
Reference
Illustration
Argentina CAB-7513ACR= or
CAB-IR2073-C19-AR=
IRAM 2073 16 A, 250 VAC Figure A-31
Australia, New Zealand CAB-AC-16A-AUS= AU20S3 16 A, 250 VAC Figure A-46
People’s Republic of China CAB-AC16A-CH= GB16C 16 A, 250 VAC Figure A-37
Continental Europe CAB-AC-2500W-EU= CEE 7/7 16 A, 250 VAC Figure A-41
International CAB-AC-2500W-INT= IEC 309 16 A, 250 VAC Figure A-42
Israel CAB-AC-2500W-ISRL= SI16S3 16 A, 250 VAC Figure A-34
Italy CAB-7513ACI= CEI 23-16/7 16 A, 250 VAC Figure A-35
Japan, North America
(nonlocking plug)
200–240 VAC operation
CAB-AC-2500W-US1= NEMA 6-20 16 A, 250 VAC Figure A-43
Japan, North America
(locking plug)
200–240 VAC operation
CAB-AC-C6K-TWLK= NEMAL6-20 16A, 250VAC Figure A-44
Japan, North America
100–120 VAC operation
CAB-7513AC=
1
1. When operating with 100–120 VAC, you must use two or three AC power cords and the power supply output is limited to either 2800 W (2 inputs) or
4200 W (3 inputs).
NEMA 5-20 16 A, 125 VAC Figure A-36
Power Distribution Unit
(PDU
2
2. The PDU power cable is designed for users who power their switch from a PDU. The end of the cable that plugs into the Catalyst 6500 series switch
chassis has a C19 connector; the other end of the cable that plugs into the PDU has a C20 connector.
CAB-C19-CBN= IEC 60320 C19
IEC 60320 C20
16 A, 250 VAC Figure A-47
Switzerland CAB-ACS-16= SEV 5934-2 Type 23 16 A, 250 VAC Figure A-45