Datasheet

ManualsBrandsCisco ManualsPower Supply UnitsPWR-1400-AC=

Corporate Headquarters:

Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA

Guide to Supported Hardware for Cisco 7600

Series Routers with Cisco IOS Release 12.2SR

This publication lists the supported hardware for Cisco 7600 series routers with Cisco IOS Release

12.2SR.

Use this publication with the Release Notes for Cisco IOS Release 12.2SRA on the Cisco 7600 Series

Routers.

Contents

This publication contains these sections:

• Document Revision History, page 2

• Supported Hardware, page 3

• Unsupported Hardware, page 60

• Related Documentation, page 62

• Obtaining Documentation, page Boilerplate 1

• Documentation Feedback, page 64

• Cisco Product Security Overview, page 64

• Product Alerts and Field Notices, page 65

• Obtaining Technical Assistance, page 65

• Obtaining Additional Publications and Information, page 67

Summary of content (68 pages)

PAGE 1
Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 12.2SR This publication lists the supported hardware for Cisco 7600 series routers with Cisco IOS Release 12.2SR. Use this publication with the Release Notes for Cisco IOS Release 12.2SRA on the Cisco 7600 Series Routers.
PAGE 2
Document Revision History Document Revision History Revision Date Change Summary OL-10362-4 January, 2008 Added the following for Cisco IOS release 12.
PAGE 3
Supported Hardware Supported Hardware These sections describe the hardware supported in Cisco IOS Release 12.
PAGE 4
Supported Hardware • Route Switching Processor 720, page 6 Supervisor Engine 720 • Supervisor Engine 720 Common Features, page 4 • Supervisor Engine 720 with PFC3BXL, page 4 • Supervisor Engine 720 with PFC3B, page 5 Supervisor Engine 720 Common Features • Integrated 720-Gbps Switch Fabric • 64-MB bootflash device • 2 CompactFlash Type II slots (disk0 and disk1) Note • Some Supervisor Engine 720 Release 12.
PAGE 5
Supported Hardware Supervisor Engine 720 with PFC3B Product ID Power (append “=” for spares) Required WS-SUP720-3B Product Description 7.50 A@42 V Supervisor Engine 720 with PFC3B: • 512-MB DRAM • Policy Feature Card 3B (PFC3B); see the “RSP720-3C-10GE” section on page 9 • Multilayer Switch Feature Card 3 (MSFC3): Minimum Software Version 12.2(33)SRA – 512-MB DRAM – 64-MB bootflash Note • There are no memory-only upgrade options for WS-SUP720-3B.
PAGE 6
Supported Hardware These service modules: – WS-SVC-AON-1-K9—Application-Oriented Networking Module – WS-SVC-AGM-1-K9—Anomaly Guard Module – WS-SVC-ADM-1-K9—Traffic Anomaly Detector Module – WS-SVC-MWAM-1—Multi-Processor WAN Application Module • Supervisor Engine 32 does not support these software features and commands: – Protocol independent multicast (PIM) snooping designated-router flooding configurability – NetFlow version 9 – Egress multicast replication – Multicast replication mode detection – All fab
PAGE 7
Supported Hardware • QoS port architecture (Rx/Tx) is 1p1q4t/1p2q2t RSP720-3C-GE Product ID Power (append “=” for spares) Required RSP720-3C-GE Product Description 6.
PAGE 8
Supported Hardware RSP720-3CXL-GE Product ID Power (append “=” for spares) Required RSP720-3CXL-GE Product Description 7.
PAGE 9
Supported Hardware RSP720-3C-10GE Product ID Power (append “=” for spares) Required RSP720-3C-10GE Product Description 7.
PAGE 10
Supported Hardware RSP720-3CXL-10GE Product ID Power (append “=” for spares) Required RSP720-3CXL-10GE Product Description 7.
PAGE 11
Supported Hardware Policy Feature Cards • Policy Feature Card Guidelines and Restrictions, page 11 • Policy Feature Card 3BXL, page 12 • Policy Feature Card 3B, page 12 • Distributed and Centralized Forwarding Cards, page 13 Policy Feature Card Guidelines and Restrictions • The PFC3 supports a theoretical maximum of 64,000 MAC addresses (32,000 MAC addresses recommended maximum).
PAGE 12
Supported Hardware Policy Feature Card 3BXL Product ID Power (append “=” for spares) Required WS-F6K-PFC3BXL Product Description Minimum Software Version 2.57 A@42 V Policy Feature Card 3BXL (PFC3BXL) Supported only with Supervisor Engine 720 12.2(33)SRA Note • There are no memory upgrade options for WS-F6K-PFC3BXL. • Use WS-F6K-PFC3BXL= to upgrade a WS-SUP720 or WS-SUP720-3B with a PFC3BXL. WS-F6K-PFC3BXL= includes 1 GB memory upgrades for the Supervisor Engine 720 and the MSFC3.
PAGE 13
Supported Hardware Policy Feature Card 3CXL Product ID Power (append “=” for spares) Required WS-F6K-PFC3CXL Product Description Minimum Software Version 2.57 A@42 V Policy Feature Card 3CXL (PFC3CXL) Supported only with RSP 720 12.2(33)SRB Note • There are no memory upgrade options for WS-F6K-PFC3BXL.
PAGE 14
Supported Hardware Distributed Forwarding Card 3BXL • WS-F6700-DFC3BXL, page 14 • WS-F6K-DFC3BXL, page 14 WS-F6700-DFC3BXL Product ID Power (append “=” for spares) Required WS-F6700-DFC3BXL Product Description Minimum Software Version 3.30 A@42 V Distributed Forwarding Card 3BXL (DFC3BXL) for use on CEF720 modules Supported only with Supervisor Engine 720 12.2(33)SRA Note • WS-F6700-DFC3BXL uses memory that is installed on the switching module.
PAGE 15
Supported Hardware Distributed Forwarding Card 3B • WS-F6700-DFC3B, page 15 • WS-F6K-DFC3B, page 15 WS-F6700-DFC3B Product ID Power (append “=” for spares) Required WS-F6700-DFC3B Product Description Minimum Software Version 3.00 A@42 V Distributed Forwarding Card 3B (DFC3B) for use on CEF720 modules Supported only with Supervisor Engine 720 12.2(33)SRA Note • WS-F6700-DFC3B uses memory that is installed on the switching module.
PAGE 16
Supported Hardware Distributed Forwarding Card 3CXL Product ID Power (append “=” for spares) Required WS-F6700-DFC3CXL Product Description Minimum Software Version 2.35 A@42 V Distributed Forwarding Card 3CXL (DFC3CXL) for use on CEF720 modules Supported with Supervisor Engine 720 and Route Switch Processor 720 12.2(33)SRB Distributed Forwarding Card 3C Product ID Power (append “=” for spares) Required WS-F6700-DFC3C Product Description Minimum Software Version 1.
PAGE 17
Supported Hardware 10-Gigabit Ethernet Switching Modules Product ID Power (append “=” for spares) Required WS-X6704-10GE Product Description Minimum Software Version 6.28 A@42 V 4-port 10-Gigabit Ethernet XENPAK • CEF720 with WS-X6700-CFC (adds 0.75 A@42 V) • dCEF720 with WS-F6700-DFC3BXL (adds 3.30 A@42 V) • dCEF720 with WS-F6700-DFC3B (adds 3.
PAGE 18
Supported Hardware Product ID Power (append “=” for spares) Required WS-X6502-10GE Product Description Minimum Software Version 3.30 A@42 V 1-port 10-Gigabit Ethernet With Supervisor Engine 720: • – dCEF256 with WS-F6K-DFC3BXL (adds 1.47 A@42 V) – dCEF256 with WS-F6K-DFC3B (adds 1.67 A@42 V) Note • QoS port architecture (Rx/Tx): 1p1q8t/1p2q1t • Number of ports: 1 Number of port groups: 1 Port ranges per port group: 1 port in 1 group With Supervisor Engine 720 12.
PAGE 19
Supported Hardware Product ID Power (append “=” for spares) Required Product Description X2-10GB-LR Minimum Software Version 12.2(33)SRC Note • To configure WS-X6708-10GE port oversubscription, refer to the hw-module oversubscription command in the command reference at this URL: http://www.cisco.com/en/US/products/ps6922/prod_command_reference_list.
PAGE 20
Supported Hardware Product ID (append “=” for spares) Product Description Note Minimum Software Version XENPAK-10GB-ER units is not supported with Part Number 800-24557-01, as described in this external field notice (CSCee47030): http://www.cisco.com/warp/public/770/fn29736.shtml XENPAK-10GB-LR 10GBASE-LR Serial 1310-nm long-reach, single-mode fiber (SMF), dispersion-shifted fiber (DSF) 12.
PAGE 21
Supported Hardware Gigabit Ethernet Switching Modules Product ID Power (append “=” for spares) Required WS-X6748-SFP Product Description Minimum Software Version 5.32 A@42 V 48-port Gigabit Ethernet SFP • CEF720 with WS-X6700-CFC (adds 0.75 A@42 V) • dCEF720 with WS-F6700-DFC3BXL (adds 3.30 A@42 V) • dCEF720 with WS-F6700-DFC3B (adds 3.
PAGE 22
Supported Hardware Product ID Power (append “=” for spares) Required WS-X6724-SFP Product Description Minimum Software Version 2.23 A@42 V 24-port Gigabit Ethernet SFP • CEF720 with WS-X6700-CFC (adds 0.75 A@42 V) • dCEF720 with WS-F6700-DFC3BXL (adds 3.30 A@42 V) • dCEF720 with WS-F6700-DFC3B (adds 3.
PAGE 23
Supported Hardware Product ID Power (append “=” for spares) Required WS-X6516A-GBIC Product Description Minimum Software Version 3.62 A@42 V 16-port Gigabit Ethernet GBIC • CEF256 • With Supervisor Engine 720: – dCEF256 with WS-F6K-DFC3BXL (adds 1.47 A@42 V) – dCEF256 with WS-F6K-DFC3B (adds 1.
PAGE 24
Supported Hardware Product ID Power (append “=” for spares) Required WS-X6416-GBIC WS-X6416-GE-MT WS-X6316-GE-TX Note Product Description Minimum Software Version 2.81 A@42 V 16-port Gigabit Ethernet GBIC • QoS port architecture (Rx/Tx): 1p1q4t/1p2q2t • Number of ports: 16 Number of port groups: 2 Port ranges per port group: 1–8, 9–16 With Supervisor Engine 720 12.2(33)SRA With Supervisor Engine 32 12.2(33)SRA 2.
PAGE 25
Supported Hardware Small Form-Factor Pluggable Modules (SFPs) These sections describe SFPs: • Gigabit Ethernet SFPs, page 25 • Fast Ethernet SFPs, page 25 Gigabit Ethernet SFPs See the Unsupported Hardware, page 60 section for information about unsupported DWDM-SFPs. Product ID (append “=” for spares) Product Description Minimum Software Version GLC-ZX-SM 1000BASE-ZX SFP 12.2(33)SRA CWDM-SFP 1000BASE-CWDM SFP 12.2(33)SRA GLC-T 1000BASE-T SFP 12.2(33)SRA GLC-LH-SM 1000BASE-LX/LH SFP 12.
PAGE 26
Supported Hardware 10-Gigabit Ethernet Transceiver Modules Product ID (append “=” for spares) Product Description Minimum Software Version XFP-10GLR-OC192SR Cisco multirate XFP transceiver module for 10GBASE-LR Ethernet and OC-192/STM-64 short-reach (SR-1) Packet-over-SONET/SDH (POS) applications, SMF, dual LC connector 12.
PAGE 27
Supported Hardware Power over Ethernet Daughtercards Note • The Power over Ethernet (PoE) daughtercard “Power Required” values do not include the power drawn by phones. • Refer to this publication for more information about POE: http://www.cisco.com/en/US/products/hw/switches/ps708/products_white_paper0900aecd80233a7 7.shtml Product ID Power (append “=” for spares) Required WS-F6K-FE48X2-AF WS-F6K-GE48-AF Product Description 0.42 A@42 V IEEE 802.
PAGE 28
Supported Hardware 10/100/1000 Ethernet Switching Modules Product ID Power (append “=” for spares) Required WS-X6748-GE-TX Product Description Minimum Software Version 7.00 A@42 V 48-port 10/100/1000 RJ-45 • CEF720 with WS-X6700-CFC (adds 0.75 A@42 V) • dCEF720 with WS-F6700-DFC3BXL (adds 3.30 A@42 V) • dCEF720 with WS-F6700-DFC3B (adds 3.
PAGE 29
Supported Hardware Product ID Power (append “=” for spares) Required Product Description Minimum Software Version WS-X6548-GE-TX 2.98 A@42 V 48-port 10/100/1000 Mbps WS-X6548V-GE-TX 3.40 A@42 V • RJ-45 WS-X6548-GE-45AF 3.
PAGE 30
Supported Hardware Product ID Power (append “=” for spares) Required Product Description With Supervisor Engine 32 Minimum Software Version 12.2(33)SRA WS-X6148A-GE-TX and WS-X6148A-GE-45AF do not support these features: Note • More than 1 Gbps of traffic per EtherChannel • WS-F6K-DFC3B, or WS-F6K-DFC3BXL • ISL trunking • Jumbo frames • 802.1Q tunneling • Traffic storm control WS-X6148-GE-TX 2.47 A@42 V 48-port 10/100/1000 Mbps WS-X6148V-GE-TX 2.89 A@42 V • RJ-45 WS-X6148-GE-45AF 2.
PAGE 31
Supported Hardware Product ID Power (append “=” for spares) Required WS-X6516-GE-TX Product Description Minimum Software Version 3.45 A@42 V 16-port 10/100/1000BASE-T • CEF256 • With Supervisor Engine 720: – dCEF256 with WS-F6K-DFC3BXL (adds 1.47 A@42 V) – dCEF256 with WS-F6K-DFC3B (adds 1.67 A@42 V) • QoS port architecture (Rx/Tx): 1p1q4t/1p2q2t • Number of ports: 16 Number of port groups: 2 Port ranges per port group: 1–8, 9–16 With Supervisor Engine 720 12.
PAGE 32
Supported Hardware Product ID Power (append “=” for spares) Required WS-X6324-100FX-MM WS-X6224-100FX-MT 1.52 A@42 V Product Description • Single-mode and multimode MT-RJ • 128-KB per-port packet buffers • QoS port architecture (Rx/Tx): 1q4t/2q2t • Number of ports: 24 Number of port groups: 2 Port ranges per port group: 1–12, 13–24 Minimum Software Version With Supervisor Engine 720 12.2(33)SRA With Supervisor Engine 32 12.2(33)SRA 1.
PAGE 33
Supported Hardware Product ID Power (append “=” for spares) Required WS-X6548-RJ-21 Product Description Minimum Software Version 2.90 A@42 V 48-port 10/100TX RJ-21 • CEF256 • With Supervisor Engine 720: – dCEF256 with WS-F6K-DFC3BXL (adds 1.47 A@42 V) – dCEF256 with WS-F6K-DFC3B (adds 1.67 A@42 V) • QoS port architecture (Rx/Tx): 1p1q0t/1p3q1t • Number of ports: 48 Number of port groups: 1 Port ranges per port group: 1–48 With Supervisor Engine 720 12.2(33)SRA With Supervisor Engine 32 12.
PAGE 34
Supported Hardware Product ID Power (append “=” for spares) Required WS-X6348-RJ-21V WS-X6248-RJ-45 WS-X6248A-TEL WS-X6248-TEL Product Description Minimum Software Version 2.39 A@42 V 48-port 10/100TX RJ-21 • 128-KB per-port packet buffers • QoS port architecture (Rx/Tx): 1q4t/2q2t • Has WS-F6K-VPWR • Number of ports: 48 Number of port groups: 4 Port ranges per port group: 1–12, 13–24, 25–36, 37–48 With Supervisor Engine 720 12.2(33)SRA With Supervisor Engine 32 12.2(33)SRA 2.
PAGE 35
Supported Hardware Product ID Power (append “=” for spares) Required WS-X6148A-RJ-45 WS-X6148A-45AF Product Description Minimum Software Version 2.39 A@42 V 48-port 10/100TX RJ-45 2.57 A@42 V • 128-KB per-port packet buffers • QoS port architecture (Rx/Tx): 1q4t/2q2t • WS-X6148A-RJ-45 supports WS-F6K-GE48-AF • WS-X6148A-45AF has WS-F6K-GE48-AF • Number of ports: 48 Number of port groups: 4 Port ranges per port group: 1–12, 13–24, 25–36, 37–48 With Supervisor Engine 720 12.
PAGE 36
Supported Hardware Ethernet Switching Modules Product ID Power (append “=” for spares) Required WS-X6024-10FL-MT Product Description Minimum Software Version 1.52 A@42 V 24-port 10BASE-FL MT-RJ • QoS port architecture (Rx/Tx): 1q4t/2q2t • Number of ports: 24 Number of port groups: 2 Port ranges per port group: 1–12, 13–24 With Supervisor Engine 720 12.2(33)SRA With Supervisor Engine 32 12.
PAGE 37
Supported Hardware Gigabit Ethernet WAN Product ID Power (append “=” for spares) Required OSM-2+4GE-WAN+ Product Description Minimum Software Version 5.08 A@42 V 4-port Gigabit Ethernet WAN (GBIC) with two Layer 2 LAN ports; CEF256 With Supervisor Engine 720 12.2(33)SRA OC-48 Packet over SONET Note Also has four Layer 2 LAN ports. Product ID Power (append “=” for spares) Required OSM-1OC48-POS-SI+ OSM-1OC48-POS-SL+ OSM-1OC48-POS-SS+ Product Description Minimum Software Version 3.
PAGE 38
Supported Hardware Product ID Power (append “=” for spares) Required OSM-2OC12-POS-SI+ Product Description Minimum Software Version 3.36 A@42 V Enhanced 2-port OC-12c/STM-4c POS, SM-IR; CEF256 With Supervisor Engine 720 12.2(33)SRA OC-3 Packet over SONET Note Also has four Layer 2 LAN ports. Product ID Power (append “=” for spares) Required OSM-16OC3-POS-SI+ Product Description Minimum Software Version 4.
PAGE 39
Supported Hardware OC-12 ATM Note Also has four Layer 2 LAN ports. Product ID Power (append “=” for spares) Required OSM-2OC12-ATM-MM+ OSM-2OC12-ATM-SI+ Product Description Minimum Software Version 4.00 A@42 V Enhanced 2-port OC-12/STM-4 ATM OSM, MM; CEF256 Enhanced 2-port OC-12/STM-4 ATM OSM, SM-IR; CEF256 With Supervisor Engine 720 12.2(33)SRA SPA Interface Processors (SIPs) Note See the Release Notes for Cisco IOS Release 12.
PAGE 40
Supported Hardware • ATM SPAs, page 42 • Serial SPAs, page 43 • Circuit Emulation over Packet (CEoP) SPAs, page 43 Ethernet SPAs These sections describe Ethernet SPAs: • Ten Gigabit Ethernet SPAs, page 40 • Gigabit Ethernet SPAs, page 40 • Fast Ethernet SPAs, page 41 Ten Gigabit Ethernet SPAs Product ID (append “=” for spares) SIP Support Product Description Minimum Software Version SPA-1XTENGE-XFP 7600-SIP-600 1-port 10 Gigabit Ethernet SPA, LANPHY XFP Optics 12.
PAGE 41
Supported Hardware Fast Ethernet SPAs Product ID (append “=” for spares) SIP Support Product Description Minimum Software Version SPA-4X1FE-TX-V2 7600-SIP-200 4-port 10/100 Ethernet SPA TX 12.2(33)SRA SPA-8X1FE-TX-V2 7600-SIP-200 8-port 10/100 Ethernet SPA TX 12.2(33)SRA Product ID (append “=” for spares) SIP Support Product Description Minimum Software Version SPA-2XOC3-POS 2-port OC-3c/STM-1c POS SPA 12.
PAGE 42
Supported Hardware Product ID (append “=” for spares) SIP Support SPA-1XOC48POS/RPR 7600-SIP-400 Product Description Minimum Software Version XFP-10GZR-OC192LR 12.2(33)SRB1 1-port OC-48c/STM-16 SPA 12.2(33)SRA SFP Modules Supported in SPA-1XOC48POS/RPR SPA SPA-2XOC48POS/RPR 7600-SIP-600 SFP-OC48-SR 12.2(33)SRA SFP-OC48-IR1 12.2(33)SRA SFP-OC48-LR2 12.2(33)SRA 2 port OC-48 POS/RPR SPA with SFP Optics 12.
PAGE 43
Supported Hardware Product ID (append “=” for spares) SIP Support Product Description Minimum Software Version SFP-OC12-MM 12.2(33)SRA SFP-OC12-SR 12.2(33)SRA SFP-OC12-IR1 12.2(33)SRA SFP-OC12-LR1 12.2(33)SRA SFP-OC12-LR2 12.2(33)SRA 1 port OC-48c/STM-16 ATM SPA 12.2(33)SRA Product ID (append “=” for spares) SIP Support Product Description Minimum Software Version SPA-8XCHT1/E1 8-Port Channelized T1/E1 SPA 12.
PAGE 44
Supported Hardware Product ID (append “=” for spares) SIP Support SPA-24CHT1-CE-ATM 7600-SIP-400 Product Description Minimum Software Version SFP-OC3-SR 12.2(33)SRB 24-Port Channelized T1/E1/J1 ATM CEoP SPA 12.2(33)SRB The SPA-24CHT1-CE-ATM does not use SFPs, use a Telco connector with a Y cable to connect to a patch panel. Note Services SPA Carrier (SSC) Product ID Power (append “=” for spares) Required 7600-SSC-400 Product Description 5.
PAGE 45
Supported Hardware Enhanced FlexWAN Module Port Adapters Product ID (append “=” for spares) Product Description Minimum Software Version PA-2FE-TX, -FX 2-port Fast Ethernet port adapter (supported only in WS-X6582-2PA) 12.2(33)SRA PA-1FE-TX, -FX 1-port Fast Ethernet port adapter (supported only in WS-X6582-2PA) 12.2(33)SRA PA-POS-1OC3 1-port Packet over SONET OC3c/STM1 port adapter 12.2(33)SRA PA-POS-2OC3 2-port POS OC3c/STM1 port adapter 12.
PAGE 46
Supported Hardware Product ID (append “=” for spares) Product Description Minimum Software Version PA-MC-8TE1+ Multichannel T1/E1 8PRI port adapters 12.2(33)SRA PA-H PA-2H HSSI port adapters 12.2(33)SRA PA-MC-STM-1 Multichannel STM-1 port adapters 12.2(33)SRA Ethernet Services 20G Line Cards Product ID Power (append “=” for spares) Required Product Description 7600-ES20-GE3C Cisco 7600 ES20 line card, 20xGE SFP with DFC 3C 8.1 A@42 V Minimum Software Version With Supervisor Engine 720 12.
PAGE 47
Supported Hardware Product ID Power (append “=” for spares) Required Product Description 7600-ES20-10G3CXL Cisco 7600 ES20 line card, 2x10GE XFP with DFC 3CXL 8.1 A@42 V Minimum Software Version With Supervisor Engine 720 12.2(33)SRB With Supervisor Engine 32 12.2(33)SRB With RSP 720 12.2(33)SRB XFPs Supported Note XFP-10GLR-OC192SR 12.2(33)SRB XFP-10GER-OC192IR 12.2(33)SRB XFP-10GZR-OC192LR 12.
PAGE 48
Supported Hardware Traffic Anomaly Detector Module Product ID Power (append “=” for spares) Required WS-SVC-ADM-1-K9 Product Description Minimum Software Version 4.00 A@42 V Traffic Anomaly Detector Module With Supervisor Engine 720 12.2(33)SRA With Route Switching Processor 720-1GE 12.2(33)SRC With Route Switching Processor 720-1GE 12.2(33)SRC Note • Supervisor Engine 32 does not support WS-SVC-ADM-1-K9. • WS-SVC-ADM-1-K9 runs its own software—Refer to this publication: http://www.cisco.
PAGE 49
Supported Hardware Product ID Power (append “=” for spares) Required Product Description With Supervisor Engine 32 Minimum Software Version 12.2(33)SRC Note • Route Switching Processor 720 does not support WS-SVC-MWAM-1. • WS-SVC-MWAM-1 runs its own software—See this publication for more information: http://www.cisco.com/univercd/cc/td/doc/product/lan/cat6000/relnotes/mwam/index.htm WS-SVC-MWAM-1 maintains state when an NSF with SSO redundancy mode switchover occurs.
PAGE 50
Supported Hardware Intrusion Detection System Modules (IDSMs) Product ID Power (append “=” for spares) Required Product Description WS-SVC-IDSM2-K9 Intrusion Detection System Module 2; CEF256 2.50 A@42 V Minimum Software Version With Supervisor Engine 720 12.2(33)SRA With Route Switching Processor 720-1GE 12.2(33)SRC With Supervisor Engine 32 12.2(33)SRC Note WS-SVC-IDSM2-K9 runs its own software—See this publication for more information: • http://www.cisco.
PAGE 51
Supported Hardware Product ID Power (append “=” for spares) Required ACE20-SBC-K9 Product Description Minimum Software Version 5.23 A@42 V Cisco 7600 Series ACE 20 HW for Session Border Controller With Supervisor Engine 720 12.2(33)SRB1 With Route Switching Processor 720-1GE 12.2(33)SRC • ACE10-6500-K9 runs its own software—See these publications: • http://www.cisco.com/univercd/cc/td/doc/product/lan/cat6000/mod_icn/ace/index.
PAGE 52
Supported Hardware Fan Trays Note The fan trays required by the Supervisor Engine 720 are supported only with the power supplies listed in the “WS-C6503, WS-C6503-E, and CISCO7603 Power Supplies” and “CISCO7603-S Power Supplies” sections. Note Enter the show environment status | include fan command or the show environment cooling command to display information about the installed fan trays. High-Capacity Fan Trays These high-capacity fan trays support the Supervisor Engine 720.
PAGE 53
Supported Hardware CISCO7606 Power Supplies Product ID (append “=” for spares) Product Description Minimum Software Version PWR-1900-AC/6 1900 W AC power supply 12.2(33)SRA PWR-2700-AC 2700 W AC power supply 12.2(33)SRA PWR-2700-DC 2700 W DC power supply 12.2(33)SRA CISCO7606-S Power Supplies Product ID (append “=” for spares) Product Description Minimum Software Version PWR-2700-AC 2700 W AC power supply 12.2(33)SRB1 PWR-2700-DC 2700 W DC power supply 12.
PAGE 54
Supported Hardware All Other Power Supplies Product ID (append “=” for spares) Product Description Minimum Software Version WS-CAC-6000W 12.2(18)SXD 6000 W AC power supply Note Limited to 4,000 W in WS-C6509 and WS-C6506. PWR-4000-DC 4000 W DC power supply 12.2(33)SRA WS-CAC-4000W 4000 W AC power supply 12.2(33)SRA +WS-CAC-3000W 3000 W AC power supply 12.2(33)SRA Note • Required with Supervisor Engine 720 in WS-C6509-NEB or OSR7609. • Included in the WS-6509-NEB-UPGRD= upgrade kit.
PAGE 55
Supported Hardware 13-Slot Chassis Product ID (append “=” for spare) Product Description WS-C6513 Minimum Software Version Catalyst 6513 chassis: • 13 slots • 64 chassis MAC addresses • Use with Supervisor Engine 720 requires WS-C6K-13SLT-FAN2 • Does not support WS-C6500-SFM • These modules are supported only in slots 9 through 13 and do not power up in other slots: – WS-X6704-10GE – WS-X6748-SFP – WS-X6816-GBIC – WS-X6748-GE-TX CISCO7613 With Supervisor Engine 720 12.
PAGE 56
Supported Hardware 9-Slot Chassis Product ID (append “=” for spare) Product Description WS-C6509-E Catalyst 6509 chassis: WS-C6509 CISCO7609-S • 9 horizontal slots • 1024 chassis MAC addresses • Requires WS-C6509-E-FAN • Requires 2500 W or higher power supply With Supervisor Engine 720 12.2(33)SRA With Supervisor Engine 32 12.
PAGE 57
Supported Hardware Product ID (append “=” for spare) Product Description Minimum Software Version With Supervisor Engine 720 12.2(33)SRB With Supervisor Engine 32 12.2(33)SRB With Route Switch Processor 720 12.
PAGE 58
Supported Hardware Product ID (append “=” for spare) Product Description With Route Switch Processor 720 Minimum Software Version 12.2(33)SRB1 4-Slot Chassis Product ID (append “=” for spare) Product Description WS-C6504-E Minimum Software Version Catalyst 6504-E chassis: • 4 slots • 64 chassis MAC addresses • Does not support: – WS-X6500-SFM2 – WS-C6500-SFM – WS-F6K-DFC CISCO7604 With Supervisor Engine 720 12.2(33)SRA With Supervisor Engine 32 12.
PAGE 59
Supported Hardware 3-Slot Chassis Product ID (append “=” for spare) Product Description WS-C6503-E • 3 slots • 64 chassis MAC addresses • Use with Supervisor Engine 720 requires WS-C6503-E-FAN • WS-C6503-E supports: Minimum Software Version – WS-X6704-10GE – WS-X6748-SFP – WS-X6724-SFP – WS-X6748-GE-TX • WS-C6503-E does not support: – WS-X6500-SFM2 – WS-C6500-SFM – WS-F6K-DFC CISCO7603-S With Supervisor Engine 720 12.2(33)SRA With Supervisor Engine 32 12.
PAGE 60
Unsupported Hardware Unsupported Hardware The following hardware is not supported: • See the “Supervisor Engine 32” section on page 5 for information about hardware that is not supported with the Supervisor Engine 32. • 1000BASE-BX10 SFP (GLC-BX-U, GLC-BX-U) • The SFP-GE-S, SFP-GE-L, SFP-GE-Z, and SFP-GE-T are not supported on WS-X67xx-SFPs or on Supervisor Engine 720 uplink GE ports. • With a Supervisor Engine 720, WS-X6516-GBIC hardware revisions 5.0 through 5.4 with a DFC3 installed.
PAGE 61
Unsupported Hardware Unsupported Supervisor Engines • Supervisor Engine 1 (WS-X6K-S1A-MSFC2, WS-X6K-SUP1A-MSFC) • Supervisor Engine 2 (WS-X6K-S2U-MSFC2, WS-X6K-S2-MSFC2) Unsupported Policy Feature Cards and Distributed Forwarding Cards • PFC2 • PFC3A (WS-F6K-PFC3A) • DFC3A (WS-F6700-DFC3A ) Unsupported Line Cards • FlexWAN module (WS-X6182-2PA) • OSM-4GE-WAN-GBIC • OSM-1OC48-POS-SS, SI, SL • OSM-4OC12-POS-MM, SI, SL • OSM-2OC12-POS-MM, SI, SL • OSM-16OC3-POS-MM, SI, SL • OSM-8OC3-POS
PAGE 62
Related Documentation Unsupported Power Supplies These power supplies cannot support high-capacity fan trays: – WS-CAC-1300W – WS-CDC-1300W – WS-CAC-1000W Note Unsupported modules remain powered down if detected and do not affect system behavior.
PAGE 63
Related Documentation – Internetwork Design Guide – Internetwork Troubleshooting Guide – Configuration Builder Getting Started Guide The Cisco IOS Configuration Guides and Command References are located at this URL: http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/index.htm • For information about MIBs, go to this URL: http://www.cisco.com/public/sw-center/netmgmt/cmtk/mibs.shtmlObtaining Documentation Cisco documentation and additional literature are available on Cisco.com.
PAGE 64
Documentation Feedback Documentation Feedback You can provide feedback about Cisco technical documentation on the Cisco Support site area by entering your comments in the feedback form available in every online document. Cisco Product Security Overview Cisco provides a free online Security Vulnerability Policy portal at this URL: http://www.cisco.com/en/US/products/products_security_vulnerability_policy.
PAGE 65
Product Alerts and Field Notices http://www.cisco.com/en/US/products/products_security_vulnerability_policy.html The link on this page has the current PGP key ID in use. If you do not have or use PGP, contact PSIRT to find other means of encrypting the data before sending any sensitive material. Product Alerts and Field Notices Modifications to or updates about Cisco products are announced in Cisco Product Alerts and Cisco Field Notices.
PAGE 66
Obtaining Technical Assistance Tip Displaying and Searching on Cisco.com If you suspect that the browser is not refreshing a web page, force the browser to update the web page by holding down the Ctrl key while pressing F5. To find technical information, narrow your search to look in technical documentation, not the entire Cisco.com website. After using the Search box on the Cisco.
PAGE 67
Obtaining Additional Publications and Information Severity 4 (S4)—You require information or assistance with Cisco product capabilities, installation, or configuration. There is little or no effect on your business operations. Obtaining Additional Publications and Information Information about Cisco products, technologies, and network solutions is available from various online and printed sources.
PAGE 68
Obtaining Additional Publications and Information Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 12.