User guide

16
Installing and Using the Viewer and Recorder Software
Business Internet Video Camera with Audio
Chapter 5
Record after Motion Detected Set the time so the Utility
will stop recording a certain time after the Utility detects
motion in a Camera’s field of view.
Disk Allocation for Recording
Total Disk Space This shows the total amount of storage
space on your hard drive.
Available Disk Space This shows the amount of storage
space available on your hard drive.
Enable Disk Space Limitation This feature allows you
to limit the amount of space your recordings occupy on
your hard drive. Click the box for this feature and then
enter the Maximum Allowed Space in the next box. The
Maximum Allowed Space is the amount of space on your
hard drive you’ll allow your recordings to take up, which
should be smaller than the available room you have left
on your drive along with space for your operating system
and other programs. Plan for when that space gets full by
clicking either Overwrite Earliest File, which will delete old
recordings as new ones fill the space, or Stop Recording,
which will end your recording once you fill the space.
Allow a minimum of 300 MB storage space per camera. If
you will be using the same drive that Windows is installed
on to store your recordings, make sure you leave at least
ten percent of available disk space free.
Initial Settings
Launch this Utility when Windows Started Check this
to have this utility start when Windows starts.
Using the Playback Application
Playback
Video Playback
Load Other Cameras This option allows you to point to a
specific folder to locate video from other cameras.
Select Camera Select the appropriate camera as defined
within the Monitor.
Recording Methods There are four recording methods
to choose from:
All Records Displays all records for the selected
Camera.
Select Period Selecting this option will narrow down
the video selections to the range defined within the
start/end date/time fields.
Start Date Select a starting date from the
calendar.
Start Time Select a starting time using the 24 hr
time format.
End Date Select an ending date from the
calendar.
End Time Select an ending time using the 24 hr
time format.
Event Trigger Selecting this option will limit the
video selections to videos that were recorded because
an event occurred.
Input Trigger Selecting this option will limit the video
selections to videos that were recorded because they
were triggered by an input.
Submit Once all of the video search parameters have
been defined, click this button to obtain your results.
Video Controls
Play Use this to re-start viewing, after
using the Stop or Pause button.
Pause Clicking this pauses the video
playback.
Frame by Frame This button is used to
play the video one frame at a time.
Stop This will terminate the connection
to the camera, halting both the viewing
and the recording (if in progress).
Snapshot Clicking this captures an image
from the current video.
Zoom In This button is used to zoom in
on the image.
•
•
–
–
–
–
•
•