System information

Using the Setup Screen
Configuring Audio, Video, and Camera Controls
Cisco Small Business Administration Guide for the Model PVC300 PTZ Internet Camera with Audio and PoE 50
6
Preset Position—In this area, you can set preset positions for the PVC300 PTZ
Internet Camera. You can also select some preset positions for it to patrol. A total
of twenty preset positions can be configured.
Follow the steps below to set a preset position:
STEP1 Adjust the PVC300 PTZ Internet Camera to a desired position using the buttons on
the right side of the window. Click Set as home or Default home to define your
home definition.
STEP 2 In the Preset position name text box, enter a descriptive name for the preset
position. The preset position name allows up to forty characters. Click Add to take
effect.
STEP 3 To remove a preset position from the list, select a preset position name from the
Preset Positions dropdown list and then click Delete.
STEP4 Click Save to take effect.
Patrol Selection—Allows you to add the preset positions into the Selected
locations box. This will determine where the camera will travel to and stop at each
position when you select Auto Patrol on the Home page.
Save—Once all settings are configured, click Save to save the settings, or all
settings will be lost.