System information

8
Profile Series, Codec C Series and Quick Set C20 / C20 Plus Getting started guide
D14639.02 Profile Series, Codec C Series and Quick Set C20/C20 Plus Getting Started Guide TC4.0, November 2010.
Copyright © 2010 Cisco Systems, Inc. All rights reserved.
www.cisco.com
8
Password protection of the Advanced menu
It is recommended to define a password to protect the Advanced menu.
Changing the advanced settings may affect the behavior of the system and
should be done by the system administrator.
NOTE: When you define, or change a password, make sure you keep a copy
of the password in a safe place.
How to set the menu password
1. Go to Settings > Advanced > Set menu password.
On the remote control, press the # key to toggle between lower or upper
case characters and numbers: abc/ABC/123.
2. Enter the menu password. The password you enter is hidden; each
character is replaced with a star (*).
3. Select Save to save the changes, or Cancel to leave without saving.
4. Press Home ( ) to exit.
Contents
Password protection
Introduction
Configure your system
The remote control
The menu system
The web interface
Configure your system