System information

20
Profile Series, Codec C Series and Quick Set C20 / C20 Plus Getting started guide
D14639.02 Profile Series, Codec C Series and Quick Set C20/C20 Plus Getting Started Guide TC4.0, November 2010.
Copyright © 2010 Cisco Systems, Inc. All rights reserved.
www.cisco.com
The Call page
Making calls from the web
interface
Sometimes, e.g. when you are configuring the
system from a remote location, it is convenient
to be able to make calls from the video system
to ensure everything works as expected.
How to make a call
Input field: Enter one or more characters in
the input field, until the name you want to
call appears in the dynamic search list; or,
enter the complete name or number.
Dial: Press Dial to initiate the call.
Disconnect all: Press Disconnect all to
end all calls.
Options: Click Options to change the bit
rate for this call. Select the Call rate in the
drop down list.
The call status page
The call status page appear when you
make a call. Please allow for approximately
30 seconds after the call is up before
checking call details
You will find the following information on
the call status page:
• Remote number
• Status: Connected
• Direction: Incoming/Outgoing
• Protocol: H323/SIP
• Transmit and receive call rates
• Encryption
• Audio: Transmit and receive protocols
• Video: Transmit and receive protocols
and resolutions
• Presentation: Transmit and receive
protocols and resolutions
Contents
Password protection
Introduction
Configure your system
The remote control
The menu system
The web interface
The web interface