System information

10
Profile Series, Codec C Series and Quick Set C20 / C20 Plus Getting started guide
D14639.02 Profile Series, Codec C Series and Quick Set C20/C20 Plus Getting Started Guide TC4.0, November 2010.
Copyright © 2010 Cisco Systems, Inc. All rights reserved.
www.cisco.com
Using the remote control
The Functions keys
in the upper part of
the remote control
reflect the softkeys
on screen.
The middle part of
the remote control is
used to handle the
video, sound, phone
book, menus and
navigation.
The lower part of
the remote control is
similar to the keypad
of a mobile phone.
HOME: Press the
Home key to go
back to the Home
menu.
PHONE BOOK: Press
the Phone Book key
to display the phone
book.
LAYOUT: Press
the Layout key to
display the layout
menu, then select a
view in the menu.
Inserting the batteries
Make sure the remote control has
working batteries (4 x AAA batteries).
ARROW UP/DOWN: Press the up and
down arrow keys to navigate in the menu
and to move the camera (pan, tilt) when the
menu on screen is not displayed.
ARROW LEFT:
Press the left
arrow key
to go one step
back in the menu
or to move to the
left in a text field.
ARROW RIGHT:
Press the right
arrow key to expand
the selected menu
item or to move to
the right in a text
field.
FUNCTION KEYS: Each Function key
corresponds to a softkey on the screen
and represents shortcuts and advanced
functions..
MICROPHONE: Press
the Microphone key to
switch between setting
the microphone to on
and to off.
VOLUME: Press
the + or – on the
Volume key to adjust
the codec volume.
MUTE: Press the – to
mute an incoming
call.
PRESENTATION:
Press the Presentation
key to show or hide a
presentation.
ZOOM: Press
the + or – on the
Zoom key to zoom
the camera in and
out.
OK/SELECT: Press the
OK/Select key to confirm
your choice or selection.
Contents
Password protection
Introduction
Configure your system
The remote control
The menu system
The web interface
The remote control