Installation Guide

4027869 Rev A 19
Unified Management
Ag
ent
File Management for Upgrading
The following screen, located in the iConfig utility of PrismaView, shows the File
Management functionality of the UMA. Operators can easily upload and store new
firmware versions for upgrading multiple devices with on-board logic installed in,
or connected to, a chassis.
Telnet Session with UMA
With the UMA, users can also manage multiple devices installed in, or connected to,
a chassis via a Telnet session, as well as assigning an IP address.
In the example below, the devices listed on the left (e.g., MetroFiber 3) represent
Host FiberLinX-II units while the devices listed on the right (Irvine POP 3) represent
Remote FiberLinX-II units. The names (SNMP sysName) given to each FiberLinX-II
device are easily assigned/ changed via PrismaView, serial configuration, etc.