System information

© 2006 Cisco Systems, Inc. All rights reserved. Cisco Confidential Presentation_ID Kirkpatrick 092509
87
S-QAM FS Configurable Parameters
Parameter
Name (
LCI)
ICIM
Abbreviation
Description
Values
Default
Laser Enable
Enable
Enables or disables amplifier
operation; turns the laser on or off.
ON (1) = Enabled
OFF (0) =
Disabled
ON (1)
Low RF Alarm
Inhibit
LoRFInh
Enables or disables the "RF input
low" alarm.
ON (1) = Alarm
Enabled
OFF (0) = Alarm
Disabled
OFF (0)
Master
Master
Configures the module as master
or slave:
If set to Master, the transmitter is
controlled only by the Enable
control above.
If set to Slave, the transmitter is
controlled by a combination of
Enable and the external input
CNT_IN_1.
ON (1) = Master
OFF (0) = Slave
ON (1)