System information

© 2006 Cisco Systems, Inc. All rights reserved. Cisco Confidential Presentation_ID Kirkpatrick 092509
86
S-QAM FS Operating Status Parameters
Parameter
Name (
LCI)
ICIM
Abbreviation
Function
Typical Value
Optical Output
Power
OutPwr
Displays optical output power.
10.1 dBm
Laser Bias
Current
LasBias
Displays laser bias current.
88 mA
RF Input Power
InRF
Displays RF input level.
0.0 dB
Module
Temperature
ModTemp
Displays module temperature.
28.5
°C
TEC Current
TecCur
Displays laser thermoelectric cooler current.
112.9 mA
Laser
Temperature
LasTemp
Displays laser temperature.
19.0
°C
Laser RF Drive
LasRF
RF drive level at laser input reference to
nominal setup.
-
1.5 dB
Laser Enable
Enable
Laser on/off.
-
Low RF Alarm
Inhibit
LoRFInh
Low RF alarm enabled/disabled.
-
Master
Master
Master or Slave operation.
-
RF Drive Level
RFDrive
RF drive level reference to nominal setup.
0.0
AGC
AGC
Automatic Gain Control.
-
Length
FibLinDi
Displays distance setting in kilometers.
40
km
Dither
Dither
Displays dither On/Off (usually Off).
-
Note: Monitored values may vary from module to module. The values shown above are
examples only