System information

© 2006 Cisco Systems, Inc. All rights reserved. Cisco Confidential Presentation_ID Kirkpatrick 092509
81
Install the Module in a XD Chassis
1. Locate the fiber tray at the bottom of the chassis and the application
module slots inside the chassis as shown in the following illustration
2. Align the ridges on the top and bottom of the module with the module
guide slots located on the chassis.
3. Gently slide the module into the chassis until its power and
communications connections join connectors on the midplane bus. Do
not force the module into the chassis. If properly aligned, it should slide in
with minimal force.