System information

© 2006 Cisco Systems, Inc. All rights reserved. Cisco Confidential Presentation_ID Kirkpatrick 092509
80
Prisma II Chassis Installation
 When installed in a Prisma II standard chassis, the module is placed in a
host module and then inserted into the chassis in slots 5 through 16.
 If the module occupies the upper host module position, its slot number is
the same (5 through 16) as that of the host module.
 If the module occupies the lower host module position, its slot number is
16 plus the host module slot number, or 21 through 32.
 Slots 1 through 4 are usually reserved for the power supplies. If an ICIM is
installed, it occupies slots 15 and 16. If an ICIM is not installed, any other
module (or host module) can occupy these slots.