System information

© 2006 Cisco Systems, Inc. All rights reserved. Cisco Confidential Presentation_ID Kirkpatrick 092509
29
Connecting RF Cables
 The chassis back panel has two RF connectors, A and B, for each
application module slot. Each pair of RF connectors is numbered (1-16) to
show its corresponding slot number. RF port A, leftmost in each pair, is
marked by a black semicircle or nut at the base of the connector. RF port
A provides connection to the upper of two independent RF channels on
the chassis midplane, while RF port B provides connection to the lower RF
channel.