Specifications

4000326 Rev A Transmitters 1-73
Monitor Status Parameters Using the ICIM,
Continued
Monitoring Status Parameters
From the MAIN or SCROLL menus on the ICIM, navigate to the Prisma II 1310 nm
Forward Transmitter MODULE menu. From the MODULE menu, press the
STA T
key to display the STATUS menu.
The following table describes each transmitter status parameter.
Parameter Units Meaning
OutPwr dBm Optical output power
LasBias mA Laser bias current
InRF dB RF input level
ModTemp °C Module temperature
TecCur mA Laser thermoelectric cooler current
LasTemp °C Laser temperature
Enable N/A Laser on/off
CwMode N/A Continuous wave (CW) mode operation
LoRFInh N/A Low RF alarm enabled/disabled
Master N/A Master or slave operation
RFDrive N/A RF drive level