Specifications

1-62 Transmitters 4000326 Rev A
Monitor Alarm Parameters Using the ICIM
Introduction
The Intelligent Communications Interface Module (ICIM) in the Prisma II Chassis
allows you to scroll through and view alarms that may exist for the TSD Transmitter.
Transmitter Status LED Description
The Status LED located on the transmitter’s front panel illuminates or blinks to
indicate the state of the transmitter.
If the Status LED is illuminated red or blinking red, an alarm has been generated.
The following table shows each possible transmitter state.
If the Status LED: This Indicates:
Illuminates green the transmitter is operating properly with no alarms.
Blinks red a minor alarm condition.
Illuminates red a major alarm condition.
Alarm Information
The following transmitter alarm information is available.
• Optical output power
• Laser temperature
Alarm Limits
Alarms limits fall into one of the following categories.
• Minor
• Major
Continued on next page