Specifications

1-30 Transmitters 4000326 Rev A
Monitor Status Parameters,
Continued
Monitoring Status Parameters
The following table describes each status parameter.
Parameter Meaning Operating Range
Summary
STATUS
Screen:
• Power
Laser power +18.0 dBm to -3.0 dBm
• Bias
Laser bias current +18.0 mA to -3.0 mA
• ID
SMC ID Programmable 0001 to 65535
Power Laser power +18.0 dBm to -3.0 dBm
Bias Laser bias current 20 mA to 90 mA
Ltemp Laser temperature OK, HIGH, or LOW
Rflvl RF level OK, HIGH, or LOW
RFLow RF low alarm On or Off
Rel RFdrv RF drive level -1.5 dB to +1.5 dB
Mtemp Module temperature -5.0°C to 50.0°C
D5Vdc +5 V DC digital power level +4.75 V DC to +5.25 V DC
A5Vdc +5 V DC analog power level +4.5 V DC to +5.5 V DC
-5Vdc -5 V DC backplane power level -4.5 V DC to -5.5 V DC
15Vdc +15 V DC control card power level +13.5 V DC to +16.5 V DC
24Vdc +24 V DC backplane power level +21.5 V DC to +26.5 V DC
PSpri Primary backplane power supply status OK or FAIL
Pssec Secondary backplane power supply status OK or FAIL