Specifications

4-38 Optical Amplifiers 4000326 Rev A
Configure Parameters Using the ICIM
Introduction
The CONFIG menu on the ICIM allows you to configure several amplifier
parameters.
Configuring Parameters
From the MAIN or SCROLL menus on the ICIM, navigate to the Prisma II Optical
Amplifier MODULE menu. From the MODULE menu, press the
CFG
key to
display the CONFIG menu.
The following table shows the configurable parameters for the amplifier.
Parameter Description Values Default
Enable Turns optical amplifier on/off.
• On
• Off
On
SetAtten Optical power attenuation.
0.0 dB to 3.0 dB in
1.0 dB steps
0.0 dB
Master
Master (default). When set to Slave,
will only start with an external alarm
signal.
• On
• Off
On
LoInpInh Disables low input alarm.
• On
• Off
On